How To Clean A Clogged Garden Sprayer

Download Article

Having a garden sprayer is essential to any gardener, landscaper, or homeowner keeping up with lawn maintenance. Garden sprayers distribute pesticides and herbicides (weed killers) from a reservoir tank, through a wand and spray nozzle, and out onto your lawn. Cleaning your garden sprayer with a solution of water and ammonia will allow the tool to be used for several years and will also keep plants and flowers healthy and happy.

1

Finish on an empty tank. Plan ahead with your herbicide or pesticide so that you're only filling the tank with as much of the liquid as you need. Spray plants a second time if you need to use up excess herbicide since almost all herbicides are approved to be sprayed twice.^[1]
2
Dispose of any liquid remaining in the sprayer. Contact your local health department or environmental agency to find a safe way to dispose of this liquid. Do not empty the chemicals onto grass, near any flowers or plants, down a drain or into a water source. Doing so can harm local plants and animals.^[2]
- If you need to empty your sprayer quickly, find an empty plastic or glass container that you can pour the leftover chemicals into (such as the original bottle), then seal and dispose of it later.
- A large, sterile gravel parking lot can also be used for spraying out the last bit of remaining product as a last resort to storing it for transfer to a proper disposal site if absolutely necessary. Avoid spraying it in the most heavily trafficked part of the gravel lot. Choose an out-of-the-way location, such as near a fence.
3

Clean the sprayer immediately after each use. Do not allow the sprayer to sit with herbicide or pesticide in it, even just overnight. Residues from the chemicals you use can build up over time and make your sprayer more difficult to clean.

1

Check the label of the herbicide or pesticide that was recently used. Depending on the chemical, there may be specific instructions for how to clean the sprayer. Follow any cleaning directions on the product's container.
2

Wear proper safety gear. Since you'll be working with harsh chemicals, make sure you wear rubber gloves and safety goggles. If you have one, wear a face shield to protect yourself from splashes.^[3]
3
Flush the garden sprayer with hot water. Fill the reservoir until it's about halfway full, and then squirt the hot water through the garden sprayer until all the water in the reservoir has been used. Spray the water in a safe location, away from water sources and areas accessible to children and pets.
- Consider spraying next to or near where you were using the herbicide or pesticide since the chemical residue will be the same.
- If you will be using the same type of chemical the next day, you can stop after a thorough flush with water and skip any further cleaning until you're completely finished with that product.
4
Flush with an ammonia-based cleaning solution. The cleaning solution should contain about 1 ounce (30 mL) of ammonia per gallon (3.8 L) of water. Fill the reservoir about halfway with this solution, and then spray the cleaning solution through the garden sprayer at least three times to flush the wand and the nozzle.
- Ammonia is effective for most herbicides, but not all. Research your particular herbicide to see if a bleach solution, powdered detergent, or kerosene solution would be better. De-greasing liquid dish soap also works well, especially on petroleum-based chemicals.
- You can also purchase a commercial tank cleaner at a hardware or home improvement store. Look for one tailored toward the type of chemical you're using in the sprayer, and follow the directions on the packaging.
5

Leave the garden sprayer to rest overnight. With the reservoir about half full of cleaning solution, let it sit for several hours, preferably overnight. This will allow the solution to work into the residue in your sprayer and break it down.
6

Spray the remaining solution through the garden sprayer. The next day, spray until you've emptied the cleaning solution from the reservoir. Since the sprayer may still contain pesticide or herbicide residue, it's best to spray it in a safe area away from water sources and areas accessible to children and pets.
7

Flush the garden sprayer again with hot water. Fill the reservoir about halfway with water again, and spray the hose until you've emptied the remaining water in the reservoir.
8
Give the small parts a deeper clean. Take the hose, wand, and nozzle apart to give them a more thorough cleaning. Rinse them with warm, soapy water, and try using an old toothbrush to scrub the small crevices.^[4]
- Be sure to wear protective clothing and chemical resistant gloves at all times when handling sprayer parts while cleaning.

Add New Question

Question

Is there a way to clean a clogged switchable sprinkler/multi spray garden sprayer nozzle?

Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.

Experienced Landscaper

Expert Answer
Question

I have a sprayer that sat outside over the winter. How do I get it to spray if it won't spray at all?

Anthony "TC" Williams is a Professional Landscaper in Idaho. He is the President and Founder of Aqua Conservation Landscape & Irrigation, an Idaho Registered Landscape Business Entity. With over 21 years of landscaping experience, TC has worked on projects such as the Idaho Botanical Garden in Boise, Idaho. He is a Idaho Registered Contractor and a previously Licensed Irrigator in the State of Texas.

Experienced Landscaper

Expert Answer

Support wikiHow by unlocking this expert answer.

Break down all of the parts of the sprayer delivery system so that you can inspect and clean them. Some of the rubber parts may have deteriorated from being in constant contact with the chemicals.
Question

What do I rinse a sprayer with after using. Roundup

Roundup is a mild enough herbicide that water alone will neutralize it. Rinse the sprayer thoroughly with water a few times, spraying it out through the hose and nozzle, then let it dry.
Question

How do I clean the sprayer if I used bleach?

If it is only a bleach and water mixture, just rinse the tank and sprayer with tap water and leave open to the air. If any bleach is left, it will evaporate in just a few hours. You do not need to use any chemicals to clean or neutralize it.
Question

How do I clean sprayer after using castor oil?

To remove the castor oil, rinse the sprayer with warm soapy water, using a dish detergent or dish soap. Spray the soap and water solution through the hose and the nozzle, then repeat if there's still oil left in the reservoir.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

In addition to keeping garden sprayers clean after every chemical application, take the entire mechanism apart once per year. Inspect and clean every part, and replace anything that is worn, corroded, or broken.

Do not combine bleach with ammonia for cleaning purposes. This combination will create toxic chlorine gas.

Things You'll Need

Water
Ammonia or de-greasing dish soap
Gloves

About This Article

Article SummaryX

It's best to clean your garden sprayer immediately after each use so the chemicals don't build up inside. Always use rubber gloves, safety goggles, and a face shield if you have one to protect yourself from the harsh chemicals. You'll need to empty the tank, fill it halfway with hot water, and spray the water out in your garden to clean it out. Make sure you spray the water away from water sources or areas where children or pets go. Then, fill it halfway with an ammonia-based cleaner and leave it to soak for a few hours or overnight. After it's soaked, spray the solution out, fill it with hot water again, and spray it out one last time. To clean the hose, wand, and nozzle, rinse them with warm, soapy water and scrub them with a small brush. For more tips from our Gardening co-author, including how to dispose of remaining liquid in your sprayer, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 73,074 times.

Did this article help you?